Showing posts with label Kool-Aid. Show all posts
Showing posts with label Kool-Aid. Show all posts

Monday, December 3, 2012

Berry Pretty Star Hat

I finished the hat using my over-dyed yarn.  This is the Norwegian Star Earflap Hat by Tiennie Knits. It is a really cute design. I like it, but not a lot; and that is not the fault of the design, I like the over-dyed yarn, but this was not the right project for it. The difference between the star and the background is not crisp enough.

I made some modifications to the pattern. I started with a 4 stitch i-cord and worked up into the ear flap same as the three previous Chullos (here, here and here). The pattern is bigger than I expected. I started out with a size 8 circular needle, ripped the hat back to the earflaps, restarted with a size 7 circular and ended up changing to a 6 right after doing the purl rows. I do however, like the length of the hat. It comes down the back of my neck better than the other Chullo. It is loose enough that it does not mat down my hair when wearing it for a long time. I also put a pom pom on the top of the hat. Even though I liked the way the decreases formed a star -- the hat called for a pom pom.

I think I may end up doing another one of these in a crisper color way. I suppose a self striping yarn with a long, slow color change for the star would work better if I did not want to use a solid. I just need to make sure that all the colors pop off the back ground.

Happy knitting!

Tuesday, November 20, 2012

What happens when dye meets wool?


















Take one skein of 100% wool, add 4 packages of Kool-Aid, heat and water!

I decided to use up some left over Kool-Aid from my dyeing experiment of two weeks ago. I had two skeins of Paton's Classic Wool in a heathered light grey and decided that I would try to dye one of them with Kool-Aid in the microwave. I wish that I had taken pictures during my process, but alas, I wasn't thinking.

I made a hank of yarn out of one skein of yarn using my Niddy Noddy that I made and tied the skein using figure eight ties.

I took two envelopes of grape and two envelopes of fruit punch and mixed each color with about 3/4 cup of hot water. After soaking the yarn in warm water as per my usual method (described here), I laid it out in a glass baking dish poured the dye mix over the yarn and used the microwave to heat it.

It was kind of a wing and a prayer experiment. I can't remember how long I let the microwave run, but I let the yarn cool, rinsed and voilĂ ! Color!

I am thinking about knitting a hat in color-work with both the dyed yarn and the original light grey yarn.

Happy Dyeing!!

Sunday, November 4, 2012

All the Pretty Colors!

Here are the results of the Kool-Aid dying day. The colors in the sunlight are wonderful. Yum!

Saturday, November 3, 2012

Fun with Kool-Aid


In my last post, I told you how I bought an entire pound of Bluefaced Leicester ("BFL") roving and that I planned to dye 12 different colors with Kool-Aid. I started with my first two colors last night and then dreamed all night about dying wool and spinning. I was awake early and had my next two colors in the pot by 8 AM this morning. The beauty of using Kool-aid to dye wool is that it is readily available at just about every grocery store in the country.

The un-dyed wool
I have read several on-line articles and watched some Youtube videos on dying yarn and basically decided to go with the most commonly used process that I saw: Kettle dying. In order to kettle dye, you need a kettle which is basically a cooking pot. Since I am using Kool-Aid which is a food product, I don't have to buy a pot to use specifically for dying; however, if I decide to begin dying on a regular basis and use other types of dye, I will have to buy a separate pot.

The next item that you must have for kettle dying is acid. The acid helps the dye adhere to the protein in the wool. This dye can also be a food grade product like vinegar or citric acid. Again, Kool-aid is great for a first time dyer as it already contains plenty of citric acid so it is not necessary to add more.

Since you will be working with bright colored dyes -- even food grade ones. You may want to use gloves and wear old clothing as blue fingernails take a while to fade. I didn't use gloves but the old clothes came in handy.

Step one in preparation is to soak the roving for at least half an hour to saturate the wool. Just like when you block a finished knitted item, it takes awhile for the water to penetrate the fibers because of the natural lanolin in the wool. Since I was going to dye two colors at a time, I set it up so that I had one bunch of fiber covered in hot water in a bowl weighted down with another bowl with wool and hot water which itself was weighted down with another bowl with just water. The bowls on top kept the wool entirely under water.

While the wool was soaking, I put two pots on the stove with water and set them to boil. When the 30 minute soak is done, I carefully remove the wool and gently squeezed it dry. Wringing the wool could have damaged the fiber. I added 4 packets of Kool-Aid to each pot, using a Kool-Aid color chart that I found on line.

According to all my sources, the amount of water does not matter at all, it is the ratio of wool fibers to the Kool-aid that matters. I had separated out all of the wool into 35 to 45 gram amounts so all the colors should be even in depth, but I had no idea how bright the colors might be.

I turned off the heat on the stove, boiling could have caused the yarn to felt and that is not what I wanted! Then I added a batch of fiber to each pot. The wool sucks up the color really fast, but leaves the water behind so that after only a few minutes the water goes from colored to near clear. According to the pros, this means the dye is "spent" and the fiber can be removed from the pot. Pour the fabric into a colander and drain out the water. You will want to leave the wool to cool a little and then rinse with hot water. Don't put cold water on really hot wool or you could felt it.

I rolled the fiber into a towel to squeeze the remaining water out and hung the freshly dyed wool in my laundry room. After a long day of dying, my house smells of an odd combination of wet sheep and fruit, but I have lots of lovely colors. I was able to get three gold/wheat colors, 2 purples, 3 greens, 3 reds and a pale blue.The BFL wool started out a grey color with lots of white and black hairs in it. So the colors have lots of depth. When it is all dry, I will try to take a picture outdoors to get better pictures, but on a cold, cloudy day, the laundry room picture will have to do. Can't wait to spin it and knit it.

Happy knitting/spinning/dying.

Friday, November 2, 2012

Dying for beautiful wool.


A few weeks ago, my boss told me that my company had hired someone to head a new project. Little did I know, this person would not only be a knitter, but a spinner!!! I heard through the grapevine that I needed to introduce myself. And introduce myself I did!

I love the knitting world. It only took 10 seconds and I thought I had known her forever. We met for lunch and she gave me my first spinning lesson and loaned me an extra top whorl spindle and gave me three types of roving to get started. Oh and am I hooked. I went home that night and ordered my own spindle and 16 ounces -- yes, ONE POUND -- of Bluefaced Leicester wool.

Bluefaced Leicester are a long wool breed of sheep. longwool types are easier to spin. The "blue" is due to the color of the skin, not the color of the wool. Their faces are bald and their noses are "roman" which makes them look a little sad. According to the breed standard, "On both white and natural colored Bluefaced Leicesters, the wool should be tightly purled, fine, dense, semi-lustrous, and when parted, it should open cleanly to the skin. There should be an even, consistent fleece coverage on the body, and the fleece should be free of hair and kemp. There should be no tendency for the main body of fleece to “peel” (the fleece breaking and sloughing off).

The Bluefaced Leicester is classified as a longwool breed with a staple length of 3-6 inches, a fleece weight of 2½-4½ lbs., and a fiber diameter of 56s–60s count, or 24-28 microns. It creates high-quality semi-lustre yarns with soft hand, beautiful drape, and excellent dyeing properties."

I separated the wool into 12 pieces of 35 to 45 grams of roving and ran out to 3 different grocery stores to pick up a variety of Kool-Aid packages. Yes, Kool-Aid. Yes, you can dye wool with Kool-Aid. I just started with two colors tonight and will blog about the dyeing tomorrow.

Happy Knitting, errrr, Spinning, no Dyeing!!!